Click To Call(689) 264-6557Click To Get A Free Estimate
Sealed brick paver driveway at a home in Fairview Shores

Paver sealing for Fairview Shores homes

Paver Sealing in Fairview Shores, FL

Fairview Shores pavers near Lake Fairview Park can look fresh again, so call (689) 264-6557 for a free estimate.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.50 to $3.00 a sq ft to clean, sand and seal
Call Now(689) 264-6557
Paver sealing

Fast, careful paver sealing in Fairview Shores

Looking for paver sealing in Fairview Shores? A local contractor washes, re-sands and seals driveways, walkways and patios, and the first estimate is free. Call (689) 264-6557 and a reply comes inside 1 business day, often earlier.

Say the drive has a gray cast, the joints have gone bare and the edge by the lawn is green. A wash, new sand and a fresh coat bring back one even color. To describe yours, ask for a free estimate, or ask any question first.

Call (689) 264-6557

Family relaxing by a sealed paver pool deck near Fairview Shores
Why hire local

Why hire a local paver sealing contractor in Fairview Shores?

Fairview Shores homeowners often hire locally because small lots, a big lake nearby and a mix of owners and renters make every job a little different. For a plan that fits your property, call (689) 264-6557.

Price before you commit

The contractor measures your Fairview Shores pavers and quotes a price first. You can say no and owe nothing.

Know the going rate

Posted Central Florida prices run $1.50 to $3.00 per square foot to clean, sand and seal. Use that span as your yardstick.

Pick matte or wet look

A wet look deepens color but shows scuffs sooner. Matte stays quieter and keeps better grip near a pool or sprinkler zone.

Nothing is locked in

You choose the date and the finish, and an estimate in Fairview Shores carries no obligation.

Get Your Free Estimate in Fairview Shores

Tell us about your pavers in Fairview Shores.

Call (689) 264-6557

Free, no obligation

Paver joint sand detail on a walkway near Fairview Shores
Common problems

What paver problems show up most in Fairview Shores?

Green film near Lake Fairview

About 15 percent of the Fairview Shores area is water, and Lake Fairview alone covers 405 acres. Algae and moss grow on pavers only where shade is heavy and the surface stays damp. A patio on the shaded side of a house will show it first. A coat laid over the film would seal it in, so the wash goes first. Pavers on the sunny side of the same house often stay clean, which is a good clue. The green marks the damp zone, and that is where the wash needs the most time.

Joint sand that does not stay put

Rain here totals about 51 inches a year, most of it in a wet season that lasts from May to late October. A low corner collects runoff, and runoff carries sand out of the joints. Wide joints let soil in and give weeds a place to root. New sand before sealing fixes that, and a sealed joint holds sand better. Spring is a good moment to look, since a quick check of the joints shows how much sand is left. Joints with little or no sand should be topped up and swept clean before a coat goes on.

Downspouts that aim at the pavers

Landscape experts note that downspout runoff and poor drainage wash out the sand under pavers and cause settlement. If your pavers dip right below a gutter, runoff is a likely cause. The dip should be reset before sealing, since sealer would only hold it in place. Show the contractor any low spot at the first visit. A driveway that sheds water toward the street can also pull sand along with it. That is why a contractor looks at where the water goes, not only at the surface.

Mineral stains from sprinklers

Well water across Florida tends to carry iron, which stains pavers orange where sprinklers reach them. One Central Florida company adds that hard-water sprinklers can stain pavers at the edges and speed wear. Those marks need treating before sealer goes on. Angling the spray heads away from the pavers helps stop new ones. Light-colored pavers show rust marks most, so a patio near a sprinkler zone is the spot to check. Rust that has sat for a long time may fade rather than vanish.

Pavers that changed hands

Fairview Shores had 4,985 housing units in 2020, and 7.6 percent of them were vacant. A home that sat empty or sold may carry a coat nobody remembers. Product type matters, because water-based sealer will not bond over a solvent-based coat, so the contractor checks first. If you manage a rental, the gap between tenants gives the pavers time to dry and cure. Ask neighbors or the last owner if anyone remembers a company name. Even a partial name can narrow down the product and save time at the estimate.

Neighborhoods

Does it matter which Fairview Shores subdivision my home is in?

Not for who can do the work, but it helps the contractor plan. Fairview Shores is an unincorporated area of Orange County with about 10,700 residents, and it holds subdivisions such as Sunshine Gardens and Fairview Gardens. Name yours when you ask for a free estimate, and add the nearest cross street.

Lake Fairview Park, at 2200 Lee Road, is 20 acres on the lake. It has five softball fields, a boardwalk and a boat ramp. Homes close to the water may hold more humidity, and a wet afternoon can keep pavers damp. Call (689) 264-6557 if your driveway sits near the lake.

The 2020 census counted 4,608 households in Fairview Shores, and 34.4 percent had one person. A clear quote with the measured square footage helps any household compare bids. To get one for your pavers, ask for a free estimate.

Pricing

What does paver sealing cost in Fairview Shores?

Expect a range, not one number. Two Orlando-area company pages show $1.50 to $3.00 per square foot for a clean, sand and seal, and Fairview Shores falls inside that. Bigger layouts cost more in total, though larger jobs often carry a lower rate per square foot. For your own figure, ask for a free estimate.

Condition moves the price more than the address does. Green growth, bare joints and an old failed coat all add labor, and stripping a coat adds more. Screened lanais and sloped lots take extra time. Ask which of these fit your yard when you call (689) 264-6557.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$450 to $900
600 sq ftTwo car driveway$900 to $1,800
1,000 sq ftLarge driveway or pool deck$1,500 to $3,000
1,500 sq ftDriveway plus pool deck$2,250 to $4,500

Math based on the $1.50 to $3.00 per square foot that Central Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in Fairview Shores
How it works

How does a paver sealing job work in Fairview Shores?

Look over the lot and the old coat

The contractor starts by walking your Fairview Shores pavers. Dips, gutter drips and sprinkler zones go on the list. If a past owner sealed this surface, the product on it decides what can go over it, because a solvent-based coat blocks water-based sealer. A dip is reset first, since sealer would hold it in place. Photos help the contractor price the job fairly. The contractor also measures the total area, which sets the price per square foot.

Wash the film and stains away

Next the surface is washed to remove algae, dirt and rust marks. Lake humidity can leave a green film on shaded edges, and sprinkler water can leave orange streaks. Heavy staining adds time to the day. The pavers are rinsed until the runoff looks clean, so loose dirt does not end up under the coat. A shaded corner by the lake may need a second pass, while a sunny driveway often cleans up quickly.

Replace the joint sand

The wash pulls old sand out, so new sand goes into every joint. Full joints help hold the stones in place and slow weeds. The contractor sweeps the extra off before sealing. This step matters on lots that shed water, where bare joints show up quickly. If your pavers sit beside a pool, the contractor keeps sand and wash water out of the water where possible.

Let the pavers dry

Sealer needs a dry surface. Showers build in the afternoon during the wet season, so work starts in the morning when the forecast allows. Damp pavers can leave a wet-look coat cloudy. Shaded corners near the lake may take longer to dry than the middle of the driveway. A quick splash on a shaded corner tells you if the surface is dry. If it darkens the paver, the surface is not ready yet.

Apply thin coats in your finish

Sealer goes on in thin coats, sprayed and then back-rolled into the joints. Matte or wet look is your choice. Quoted lifespans run from two to five years per coat. Stay off the surface for a few hours on foot and about two days with cars, and ask the contractor to name the exact day. A second thin coat follows when the first has set, since two thin coats hold up better than one thick coat.

Services

Complete paver services in Fairview Shores

A Fairview Shores job has a clear order: wash, re-sand, dry, then seal. Each step sets up the next, so the sealer sits on clean stone with full joints. The contractor can walk you through the order and the time it takes on your lot. To ask, call (689) 264-6557.

Driveways near the street take tires and road grit. Patios and pool decks collect lake humidity and sprinkler spray. Front walks under shade turn green first. Tell the contractor which of these you want sealed when you ask for a free estimate, and each surface gets its own line in the price.

Water-based sealer is the usual pick for Florida humidity, because it lets moisture escape. It cannot go over an old solvent-based coat, so the surface is checked first. A wet look adds shine and shows scuffs sooner, while matte stays quiet. Call (689) 264-6557 to talk through the choice.

Rain decides the calendar. The wet season runs from May to late October, and storms usually build in the afternoon, so mornings suit sealing best. Outside the wet season, fewer storms can open more days. To find a day that fits your week, ask for a free estimate.

Questions to ask before you hire

  • Can you fix a few sunken pavers and low spots where water pools before you seal?
  • Is the sealer rated for pool splash and chlorine on my deck?
  • What do you do about the gray film on pavers that stay damp under my oak trees?
  • How long does a two-car driveway with a front walkway take from wash to sealed?
  • What happens to my appointment if rain pushes the job back a day?
  • Will the estimate show the square feet you measured and the price for each foot?
  • How do you keep wash water and sealer off my grass and flower beds along the paver edges?
Photos

What do sealed pavers look like around Fairview Shores?

Wide freshly sealed paver driveway curving to a two-story tile roof home with a couple standing on it near Fairview Shores
Family on lounge chairs by a sealed paver pool deck in a screened lanai near Fairview Shores
Sealed paver patio with a pergola and dining set facing a pond near Fairview Shores
Sealed paver front walkway with bromeliad beds under a live oak near Fairview Shores
Close view of freshly sealed pavers with rich color near Fairview Shores
Paver patio with one cleaned half beside a mossy half near Fairview Shores
Contractor running a surface cleaner over a paver driveway near Fairview Shores
Contractor spraying sealer on a paver walkway near Fairview Shores
Contractor talking through a paver sealing estimate with a homeowner in Fairview Shores
Local

Why local matters in Fairview Shores

A local contractor knows how lake air and low lots behave around Fairview Shores. Pavers near the water can stay damp longer, so drying time is planned in. Someone new to the area may rush that step. For a contractor who already works close to Lake Fairview, call (689) 264-6557.

Local also means knowing the map. Fairview Shores is an unincorporated area of Orange County, and addresses can carry an Orlando mailing city. A contractor who works here finds your street without trouble. If you are not sure how your address reads, ask for a free estimate and add a cross street.

A local contractor can also say how long cars and feet must stay off, then fit the work to your week. Sealed pavers need a few hours before walking and about two days before cars. That matters if you share a driveway or have a tenant coming in. To plan around your calendar, ask for a free estimate.

Local roots

What is the history around Lake Fairview and Fairvilla?

Fairvilla was founded in the 1870s near Lake Fairview, with citrus groves, pineries and vineyards on the land between the early towns. In 1912 Jewish settlers started dairy farms in rural Fairvilla. Streets and homes now fill much of that ground. If you live near the old Fairvilla area, ask for a free estimate.

Orlando's city council pushed the city limits north to Par Street in 1923, and railroads that arrived in the 1880s had already brought settlers. Lake Fairview Park, at 2200 Lee Road, now gives neighbors five softball fields and a lakeside boardwalk. Fairview Shores itself went from 13,898 residents in 2000 to 10,722 in 2020. If your street is close to the park or the lake, call (689) 264-6557 and say so.

Questions

Frequently Asked Questions

How long does paver sealing last on a Fairview Shores driveway?

Quoted lifespans run from two to five years per coat. One Central Florida company says wet-look driveways need a refresh every 2 to 3 years, while natural-finish walkways go 3 to 5. A shaded patio by the lake may outlast a sunny drive. Splash water on the surface, and if it soaks in and darkens the paver, a new coat is due.

How much is paver sealing in Fairview Shores?

Expect $1.50 to $3.00 per square foot for the full clean, sand and seal, the span Central Florida companies post. Driveways tend to sit in the lower half of that span and pool decks toward the top, one company says. Have each bidder list the square feet measured, so the prices compare cleanly.

What is the downside to sealing pavers in Fairview Shores?

The main downsides are cost and upkeep. The coat wears down, so a new one is due every few years, and wet look scuffs show up faster than matte. Sealing also waits on dry stone, which means a wet week can push the date. Sealing slows weeds and algae but does not stop every one.

Why does paver sealing cost so much in Fairview Shores?

The price covers a wash, new joint sand and the sealer, which is more than a can of product. Square footage is the biggest driver, and old coats, heavy staining and tight access add labor. Stripping a failed coat adds the most. Compare quotes by the price per square foot against the Central Florida range of $1.50 to $3.00.

Is it better to spray or roll paver sealer in Fairview Shores?

Pros usually do both. They spray first, then back-roll. Spraying covers evenly, and rolling works the sealer into the joints and prevents puddles. Ask the contractor how the coats will go on and how thin they will be.

Can a Fairview Shores rental be sealed between tenants?

Yes, if the pavers get time to dry and cure before the next move-in. Walk on it within hours, and keep the car off for about two days. Book the work around a move-out date so the driveway sits unused.

Do I move my patio furniture before sealing in Fairview Shores?

Yes, plan to clear the surface, and keep furniture off for about a day after sealing. One Central Florida company says furniture should stay off about 24 hours and cars at least 48. Ask who will move heavy planters before the job day.

Will sealing stop green film near Lake Fairview?

It slows the film but does not end it. Treatments have limited protection where pavers stay damp and shaded, so a clean, sealed surface is easier to rinse rather than immune. One company recommends a maintenance wash every 12 to 15 months.

Can pavers be sealed in the Fairview Shores summer rainy season?

Yes, on a dry day, and mornings are safest. The wet season runs from May to late October, with storms most afternoons. Sealing with rain in the forecast can leave a coat white or peeling within weeks, so a good contractor moves the date instead of rushing.

How soon can I use my Fairview Shores driveway after sealing?

Walking is usually fine within a few hours, and cars should stay off about two days. Water-based sealer takes three to four hours before walking and 24 to 48 hours to cure fully, according to an Orlando paver company. Shade, humidity and rain can stretch those times, so ask for a day.

Can sealer go over an old coat on a Fairview Shores patio?

Not always. Water-based sealer cannot go over solvent-based sealer, so the contractor first finds out what is on the surface. A cloudy or flaking old coat may need stripping, which adds cost. Keep any receipt or product name that a past owner left behind.

Do I need to fix sunken pavers before sealing in Fairview Shores?

Yes, reset them first. Sealer over a dip only holds the dip in place. Poor drainage and downspout runoff wash out the sand under pavers, so mention any low spots near gutters when you ask for the estimate.

Ready for a Free Estimate in Fairview Shores?

Call (689) 264-6557 and tell us about your pavers.

Call (689) 264-6557

Free, no obligation