
A sealer matched to porous brick pavers
Brick Paver Sealing in Ocoee, FL
Call (689) 264-6557 to talk with a local contractor about your brick pavers.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Do contractors seal brick pavers around Ocoee?
Local contractors seal brick pavers around Ocoee, FL, and someone gets back to you within 1 business day, usually well ahead of that deadline. The first look is free and you owe nothing for it. Call (689) 264-6557 to set it up.
Brick has a character of its own. It soaks up water, shows stains and can fade or streak in the sun, so it needs a sealer chosen for it and not a one size coat. Think of a brick walkway that has gone blotchy after a wet summer, dark where the shade sits and chalky near the edges. A matched sealer can even that out and slow the next round. Tell the contractor whether the brick is clay or concrete when you ask for a free estimate.
Why is brick treated differently from other pavers?
Brick is porous and drinks water
The Paver Sealer Store brick guide calls bricks sensitive, permeable surfaces and says unsealed brick takes in water and can stain. In a place with about 51 inches of rain a year, per Wikipedia, that soaking happens often. Ask what stands between your brick and the next storm when you call (689) 264-6557.
Not every paver sold as brick is the same material
Clay brick and concrete pavers are different, and a Central Florida company says brick, travertine and concrete pavers each have different porosity. Unilock says materials absorb sealer at different rates. Tell the contractor what you have, or send a photo, then ask for a free estimate.
Moisture trapped inside causes cloudy results
Unilock links a whitish film to trapped moisture, heavy application or an incompatible old product. Brick that has not dried out is the usual setup for it. A dry window matters more than speed, so be ready to let the contractor wait. Call (689) 264-6557 to talk through timing.

Which sealer finish suits brick pavers: wet look or natural?
Two choices cover most brick jobs. One deepens color and adds shine, and the other keeps a quieter, more natural face. Brick often looks warm already, so the decision comes down to taste, traction and what your association allows. To compare them on your own brick, call (689) 264-6557.
A wet look pulls out the reds and browns
The Paver Sealer Store guide says wet look sealers enhance color and add sheen. Unilock says the wet look darkens color and can add gloss. On older, faded brick that is a big visual change. Ask to see a dried sample before you commit, and ask for a free estimate.
A natural look keeps more grip
The same guide says natural look sealers give a subtler finish and higher traction. Unilock names a penetrating matte as the type that keeps texture. Steps, stoops and shaded walks are good candidates, since they stay damp. For help picking, call (689) 264-6557.
Solvent or water-based, in a humid climate
Unilock says water-based sealer is the choice whenever possible, and the one to use when joint sand is in place. It says solvent suits high gloss and heavy traffic. A Central Florida company says solvent can turn white and peel in humidity. Ask which is going on your brick and why, then ask for a free estimate.
What are the white patches on my brick pavers?
A chalky white haze on brick is often efflorescence, which is mineral salt that has moved to the surface. Old sealer that has gone cloudy can look the same. The two need different handling, so a contractor should tell them apart before anything is cleaned. To get a look at yours, call (689) 264-6557.
Efflorescence needs the right cleaner and a full rinse
The Paver Sealer Store guide says it needs the right cleaner and thorough rinsing, and that sealing can help reduce its return. Sealing over active salts is a poor idea. Ask the contractor how the brick is judged ready, then ask for a free estimate.
Rust spots can be a separate problem
The same guide notes that rust stains may need a dedicated rust remover, depending on how bad they are. Brown spots under a planter stand or a metal gate foot are usual suspects. Point them out when you call (689) 264-6557.
Cloudy or sticky old sealer
If the old coat is peeling, whitening, sticky or patchy, that guide says to strip it first. A fresh coat over a failed one is how problems repeat. Send a photo when you ask for a free estimate.
What does brick paver sealing cost in Ocoee?
Orlando Paver Sealing lists $1.50 to $3.00 per square foot to clean, sand and seal brick pavers, with $750 to $3,000 as a typical project. Stripping old sealer and resealing is $3.50 to $5.00. A Castle Clean & Seal page sets a $1,000 minimum on every project. Use the table below to see where your brick falls, then ask for a free estimate.
No page read for this site prices brick by itself, so the table pieces together the published steps. If a bid arrives far outside them, ask what is in it, or call (689) 264-6557.
| Brick area | Typical layout | Wash only | Clean, sand and seal | Strip and reseal |
|---|---|---|---|---|
| 500 sq ft | Brick walk and small stoop | $75 to $375 | $750 to $1,500 | $1,750 to $2,500 |
| 800 sq ft | Brick patio with a seating area | $120 to $600 | $1,200 to $2,400 | $2,800 to $4,000 |
| 1,200 sq ft | Brick driveway or wrap-around terrace | $180 to $900 | $1,800 to $3,600 | $4,200 to $6,000 |
No company page read for this site gives a price for one brick paver job by itself, so the table is built from published pieces. The wash column uses the $0.15 to $0.75 per square foot Orlando Paver Sealing lists for a standard pressure wash, which is a general figure and not a brick price. The seal column is its $1.50 to $3.00 for clean, sand and seal on brick pavers, and the last column is its $3.50 to $5.00 for stripping and resealing. A Castle Clean & Seal page adds a $1,000 project minimum. Read in November 2026. Your own quote may differ.
Why stripping changes the number
Taking off a failed coat is its own job. Castle adds $500 to $1,000 or more for it, and the Orlando company prices the full strip and reseal at $3.50 to $5.00 per foot. Send a photo of any peeling areas when you ask for a free estimate.
Brick patterns and tight corners take longer
Curves, borders and tight steps mean more hand work. The Orlando company names slopes, tight access and furniture to move as price factors. Mention them when you call (689) 264-6557.
What is the brick paver sealing process?
The steps follow a clear order, and brick makes the drying step the one that matters most. Look for each of them in a written bid. To have the order explained for your brick, call (689) 264-6557.
1. Identify the brick and the old coat
The contractor checks whether the pavers are clay or concrete, whether a coat is already on them and whether salts or rust are showing.
2. Clean with the right product, then rinse thoroughly
Efflorescence, algae and stains each call for their own approach. Unilock asks for a low pressure fan spray, not a hard blast. Ask about the cleaner and how runoff is handled when you ask for a free estimate.
3. Refill the joints and let the brick dry out
New sand goes in and is wetted to settle. Then the brick needs real dry time. Unilock asks for no rain for at least 24 hours around the coat and a surface between 50 and 90 degrees.
4. Apply thin, even coats
The Paver Sealer Store guide says thin, even coats per the label, with no puddles and no heavy overlap. To ask how the contractor keeps coats even, call (689) 264-6557.
5. Keep traffic off until it cures
Castle says to wait 4 to 6 hours before walking on it, about 24 hours for furniture and at least 48 hours for cars. The Orlando company says a full cure takes 24 to 48 hours, or up to 72 for a solvent product. When you want to set a day, ask for a free estimate.
How often should brick pavers be resealed in Ocoee?
Most sources land between two and five years. Orlando Paver Sealing says 2 to 4 years and Unilock says many owners reseal every three to five. Brick near a pool or under oak shade may need a look sooner. A maintenance cleaning every 12 to 15 months, per the Orlando page, helps a coat last. To have a coat checked, call (689) 264-6557.
Why sun and rain shorten the cycle
Wikipedia puts Ocoee at about 51 inches of rain a year and a July high near 92 degrees. A Central Florida company adds that cheap sealer can fail in 6 to 12 months under that sun. A named, quality product is worth the extra line on the estimate. Ask about it when you ask for a free estimate.
Edges and steps wear first
Brick steps, borders and the stretch beside the garage take water and feet first. If those look dull while the middle still beads, a touch-up visit may help. Call (689) 264-6557 to ask.
Can a sealer fix loose brick or low spots?
No. Loose brick points to a base or drainage problem that Unilock says sealing cannot cure, and the Paver Sealer Store guide says to check drainage and joint washout before approving a finish. Pavers that rock need to be reset before any coat goes on. Ask whether resetting is part of the quote when you ask for a free estimate.
Ready to protect your brick pavers?
Share a photo and your street, and a reply arrives within 1 business day, usually much sooner.
Free, no obligation

How does sealed brick paver work look in Ocoee?








What do Ocoee homeowners ask about brick paver sealing?
How much to clean and seal pavers?
Orlando area pages list $1.50 to $3.00 per square foot for a clean, sand and seal on brick pavers, with $750 to $3,000 as a typical project. One company adds a $1,000 minimum. That puts a 600 square foot brick patio at about $900 to $1,800.
What is the average cost to seal pavers in Florida?
Central Florida pages cluster around $1.50 to $3.00 per square foot. Taking old sealer off first moves it to $3.50 to $5.00 on one Orlando page. A wash alone is far cheaper, at $0.15 to $0.75 per square foot, but it adds no coat.
How long does paver sealing last in Florida?
An Orlando company says two to four years, with a maintenance cleaning every 12 to 15 months. Unilock says many owners reseal every three to five. A solvent product is described by one Central Florida company as likely to whiten and peel in humidity.
Is there a downside to sealing pavers?
Yes, a few. Unilock lists a whitish film from trapped moisture, heavy application or an incompatible old product, and says gloss can be slippery when wet. For brick, the Paver Sealer Store guide adds that sealing over moisture trapped in the pavers is a mistake.
Do brick pavers need a different sealer than concrete pavers?
Often, yes. A Central Florida company says brick, travertine and concrete pavers have different porosity levels, and Unilock says materials absorb sealer at different rates. Ask the contractor to name the product and say why it suits your brick.
Why do brick pavers get white spots after rain?
That chalky haze is usually efflorescence, which is mineral salt reaching the surface. The Paver Sealer Store guide says it needs the right cleaner and a thorough rinse, and that sealing can help reduce its return. Point out the spots when you ask for a quote.
Can brick pavers with old sealer be resealed?
Sometimes. If the old coat is peeling, whitening, sticky or patchy, the Paver Sealer Store guide says to strip it first. A compatible coat in good shape may take a fresh one. A contractor has to look at it, since mixing products is how whitish film starts.
Should I choose a wet look or a natural finish on brick?
The wet look gives the brick a darker, shinier face. A natural finish gives a subtler look with higher traction, per the Paver Sealer Store guide. Brick under a pergola or near a pool often suits natural. Ask to see a dried sample on a spare corner.
Which nearby towns can book brick paver sealing?
Homes in every town below can ask for a free estimate on brick. Pick your town for local detail, or call (689) 264-6557.
Ask about sealing your brick pavers
Call or use the short form and a local contractor answers within 1 business day, often sooner.
Free, no obligation
