
A fresh start for tired Ocoee pavers
Paver Restoration and Resealing in Ocoee, FL
Call (689) 264-6557 for a free estimate to strip, repair and reseal your Ocoee pavers.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Can an Ocoee contractor restore my pavers, and how soon?
Paver restoration is on offer across Ocoee, FL, and a local contractor answers within 1 business day, usually much sooner. The inspection is free and so is the written price. To set it up, call (689) 264-6557.
Restoration is for pavers whose coat has turned white, gone cloudy or started to peel, or whose joints and settled spots need work before a new coat. The old finish comes off, the surface is repaired and cleaned, and a fresh coat goes on. A driveway that looks like frosted glass can come back to even color. To show a contractor yours, ask for a free estimate.

Which towns near Ocoee can book paver restoration?
A restoration visit is open to Ocoee and to each town on this list, across Orange, Lake and Osceola counties. Pick your town to read how sealing and weather play out there. If your street is missing, call (689) 264-6557.
How do I know my pavers need restoration and not a wash?
A coat that turned white or cloudy
An Orlando paver company lists three signs that a coat needs stripping: it has turned white or cloudy, it has started peeling, or an earlier contractor used the wrong sealer. A wash cannot lift a coat that is stuck to the paver. If your driveway looks hazy when dry, take a photo and ask for a free estimate.
Peeling, flaking or patchy shine
Patchy gloss means the coat is failing unevenly, often where tires turn or sprinklers land. Flakes in the joints are another cue. Peters Pressure Washing, a Tampa Bay company, links failure to thick coats, poor surface prep and incompatible products. Describe what you see when you call (689) 264-6557.
Plain old wear, which is not restoration
Color that has simply faded, with no film and no peeling, usually calls for a regular clean, sand and seal. That job costs less than stripping. A contractor can tell the two apart in one walk around the property, so ask for a free estimate.
Why do sealer coats fail around Ocoee?
Moisture trapped underneath
Western Interlock, a paver supplier, says cloudy spots come from moisture in the joint or bedding, because sealer does not bond fully over damp material. The spots often show when pavers get wet or sprinklers hit them. Wikipedia lists 51.45 inches of rain a year for Ocoee, so damp pavers are common. Ask how the contractor checks for dryness when you ask for a free estimate.
Humidity and the wrong product family
Castle Clean & Seal says Central Florida humidity runs 80 percent or more and that solvent-based sealer turns white and peels in it. Peters Pressure Washing names trapped water vapor as a cause of hazy coats. Which product is on your pavers now? Ask the contractor to find out, and call (689) 264-6557.
Heat at the moment of application
Western Interlock advises against sealing a surface above about 90 degrees. The July mean daily high in Ocoee is 92.0, per Wikipedia, so a sun-baked driveway can pass that mark by midmorning. Early starts in cooler months avoid the issue. To ask about timing, ask for a free estimate.
Why not just seal over the old coat?
It tempts people, because it costs less. Peters Pressure Washing says resealing over a failing coat can look better at first, then turn white again with a worse outcome. Western Interlock adds that a water-based sealer that goes wrong has to be stripped and the pavers resealed under proper conditions. To compare a strip-first plan with a cheaper bid, call (689) 264-6557.
Ask any bidder what is on the pavers now and whether the new product is compatible with it. A clear answer in writing beats a rushed one. Orlando Travertine Restoration makes a similar point about stone coatings, saying quick fixes can cause trouble later. For a written plan, ask for a free estimate.

What is the paver restoration process, in order?
The order matters, and Peters Pressure Washing lays it out the same way: strip, clean with recovery, re-sand, then seal. To see how that fits your property, call (689) 264-6557.
1. Inspect and test
The contractor maps white, cloudy and peeling areas, notes sunken spots and tests how the old coat reacts.
2. Strip the failed coat
A stripper breaks the bond between the old sealer and the paver, so the coat comes off without harming the surface.
3. Clean with recovery
A surface cleaner with vacuum recovery lifts the sealer and stripper. Peters says recovery is required by the Clean Water Act and EPA rules.
4. Reset what has settled
Sunken or rocking pavers are lifted and reset on a repaired base before the joints are filled.
5. Re-sand the joints
Peters says wet sanding condenses the sand so joints pack tight, which cuts down on weeds and sand loss.
6. Flood coat and finish coat
After the pavers dry, the sealer goes on in two passes, and the contractor walks the job with you.
Can restoration fix pavers that sank or rock underfoot?
Where sinking starts
A paver repair guide from Rochester CP says pavers rarely fail themselves. The trouble starts in the bedding, base or soil, and water washes away base fines and jointing sand. Unilock calls the base the most critical part of a paver project and says drainage problems can make pavers sink. Wikipedia counts about 121 rain days a year in Ocoee. To get a look at a settled spot, ask for a free estimate.
What a reset involves
Unilock says a single damaged paver can be lifted out, the ground beneath leveled and a new one set in. Larger areas get the base rebuilt in layers. The same guide suggests calling a pro when settling is widespread, near steps or a driveway, or tied to drainage. Mention where the dips are when you call (689) 264-6557.
Why the order of work matters
Repairs come before cleaning and sealing, since sealer will not raise a low paver or close a gap. A contractor who strips first and finds settled spots later has to redo some of the work. Ask whether resets sit in the price or on a separate line, then ask for a free estimate.
What does paver restoration cost in Ocoee?
An Orlando paver company lists stripping and resealing at $3.50 to $5.00 per square foot, with typical projects from $1,750 to $5,000 and a time of two to three days. A normal clean, sand and seal is $1.50 to $3.00 on the same page. For a figure on your pavers, ask for a free estimate.
Castle Clean & Seal gives a second view: stripping failed sealer usually adds $500 to $1,000 or more, added to a regular job, and a $1,000 minimum applies. The two methods land in the same neighborhood for mid-sized jobs. If a quote sits far outside, ask what it covers, or call (689) 264-6557.
| Paved area | Typical example | Strip, repair and reseal | Standard clean, sand and seal |
|---|---|---|---|
| 400 sq ft | Front walk and entry | $1,400 to $2,000 | $600 to $1,200 |
| 700 sq ft | Two car driveway | $2,450 to $3,500 | $1,050 to $2,100 |
| 1,000 sq ft | Driveway and side apron | $3,500 to $5,000 | $1,500 to $3,000 |
| 1,500 sq ft | Driveway plus pool deck | $5,250 to $7,500 | $2,250 to $4,500 |
The restoration column multiplies the $3.50 to $5.00 per square foot that an Orlando paver company lists for stripping and resealing, a job it puts at two to three days against one for a standard job. The last column is the $1.50 to $3.00 range for a normal clean, sand and seal. Castle Clean & Seal says stripping failed sealer usually adds $500 to $1,000 or more and sets a $1,000 minimum. Paver repairs, leveling and base work are quoted separately.
How long does a restoration take, and when can I use the pavers?
Days, not hours
An Orlando paver company says stripping and resealing takes two to three days, against one day for a standard job. Rain delays can add a day, since the pavers have to be dry. Ask for a schedule with a backup day when you ask for a free estimate.
Walking, furniture and cars
For water-based sealer, the same company says pavers are walkable in about 3 to 4 hours and fully cured in 24 to 48 hours. Castle Clean & Seal says to wait 4 to 6 hours for feet, about 24 hours for furniture and at least 48 hours for cars, longer in humid or shaded spots. Solvent products can need up to 72 hours to cure. Your contractor knows the label, so call (689) 264-6557.
What should I ask a restoration contractor in Ocoee?
Paperwork first
The City of Ocoee says a business tax receipt is required before operating in the city, and all receipts expire September 30. Some receipts need state licenses for regulated occupations. A company that works here should be able to show its receipt. For a short list of questions, see the contractor standards page, then ask for a free estimate.
Product and plan questions
Ask which stripper and which sealer will be used, how the wash water is recovered, whether sunken pavers are included and what happens if rain interrupts the work. The answers should appear in the quote. A photo before and after each area is also reasonable to request. To start the conversation, call (689) 264-6557.
Which part of an Ocoee property should be restored first?
Ocoee grew from 35,579 people in 2010 to 47,295 in 2020, according to Wikipedia, and households rose from 11,586 to 15,859. A city that adds that many people in ten years has plenty of young driveways and pool decks. Ask what sealer went on them first, since a wrong first product is one reason an Orlando company gives for stripping a coat. Start with the area where the film looks worst. To plan the order, ask for a free estimate.
Ready to restore your Ocoee pavers?
Send the street and a photo of the worst spot, or call. A contractor in the area gets back to you inside 1 business day, and often within hours.
Free, no obligation
What do restored pavers look like around Ocoee?








Frequently Asked Questions
How long does paver sealing last in Florida?
Two to five years, depending on who is asked. An Orlando paver company says 2 to 4 years, and Unilock says 3 to 5. A wrong product or a thick coat can fail in a fraction of that, which is how most restoration calls start.
Is there a downside to sealing pavers?
Yes. A coat repeats every few years, and Unilock says a whitish film can form if moisture is trapped or the coat goes on too heavy. Once that happens the failed coat has to come off before new sealer goes on.
How much to clean and seal pavers?
A normal clean, sand and seal runs $1.50 to $3.00 per square foot on Orlando-area company pages. Restoration costs more because stripping comes first: one Orlando company lists $3.50 to $5.00 per square foot for stripping and resealing.
Should you seal pavers after power washing?
Sealing is optional, but joints need fresh sand once the pavers dry, and a coat helps hold that sand through storm season. If the old coat is peeling or cloudy, it has to be stripped before any new coat, not washed over.
Is it better to spray or roll paver sealer?
Many contractors use both. Unilock lists a sprayer plus a foam or short pile roller, and a roller picks up pooled sealer. On a restoration job the thin, even pass counts more than the tool.
Can new sealer go over old sealer that is peeling or cloudy in Ocoee?
Not safely. A Tampa Bay company, Peters Pressure Washing, says resealing over a failing coat can look better at first and then turn white again, with a worse result. Stripping first is the usual advice.
How long does paver stripping and resealing take?
An Orlando paver company says two to three days, against one day for a standard job. Water-based sealer is walkable in about 3 to 4 hours and fully cured in 24 to 48 hours, depending on humidity and temperature.
Will restoration raise pavers that have sunk?
Not by itself. A paver repair guide from Rochester CP says sinking usually starts in the base, bedding or soil, and Unilock calls the base the most critical part of a paver project. Settled areas can be lifted and reset, then the surface is restored.
Why does sealer turn white after rain on my Ocoee pavers?
Trapped moisture is the usual cause. Western Interlock says cloudy spots show up where moisture sits in the joint or bedding and often appear when pavers get wet or sprinklers hit them. A coat that went on over damp pavers can fail the same way.
Does the city require a license to do paver restoration in Ocoee?
The City of Ocoee says a business tax receipt is needed before operating in the city, and that some receipts require state licenses for regulated occupations. Ask any contractor for the receipt, and for proof of insurance, before you sign.
Get a plan for your cloudy Ocoee pavers
Tell a contractor what you see on the surface. A written answer reaches you within 1 business day, often earlier.
Free, no obligation
