
Get oil, rust and leaf stains out of pavers
Paver Stain Removal in Ocoee, FL
Call (689) 264-6557 for a free estimate on lifting stains from your Ocoee pavers.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who can treat stains on pavers at my Ocoee home?
Stain treatment on pavers is open to every Ocoee neighborhood, and a local contractor responds within 1 business day, usually much sooner. Looking at the stain and quoting it cost nothing. To book a look, call (689) 264-6557.
Stains settle into pavers at their own pace: oil under a parked car, rust fanned out from a sprinkler head, brown leaf prints under an oak. Each one needs a different treatment, which is why a contractor identifies the stain first. A walk to the front door without that gray patch is the goal. To describe yours, ask for a free estimate.

Which towns near Ocoee can book stain removal?
Ocoee homes and every town below can ask for a free estimate, from Winter Garden and Pine Hills out to Leesburg. Your town has its own write-up below. If your street is not listed, call (689) 264-6557.
Which stains show up on Ocoee pavers?
Cambridge Pavers, a paver maker, treats stains one type at a time because no single cleaner handles them all. The cards below follow that idea for an Ocoee yard. Spot yours, then ask for a free estimate.
Oil and grease
Driveways carry the most. Unilock says to absorb what you can first, since oil that has soaked in is the hard kind.
Rust
Cambridge lists sprinklers, patio furniture and fertilizer as sources, and says rust may take several applications.
Leaf and tannin stains
Oaks drop leaves that leave brown prints. Cambridge says they come back every year.
Mulch, wood and mold
Damp beds beside a walk leave dark film and mildew along the paver edge.
White efflorescence
Natural salts surface as chalky patches, and Cambridge notes there is a remover made for them.
Paint, tar and tire marks
Cambridge says each needs its own remover, and small tire marks may be easier fixed by replacing pavers.
Why does rust show up on pavers near sprinklers?
Iron in the irrigation water
The University of Florida's Florida-Friendly Landscaping program says much of the state's well water is high in iron and can leave orange stains on buildings and other surfaces. It suggests having the water tested and names treatment options such as oxidizing filters. If your zones draw from a well, tell the contractor when you ask for a free estimate.
Why the same strip stains again and again
The City of Ocoee assigns watering days by address: Wednesday and Saturday for odd numbers and Thursday and Sunday for even ones in Daylight Saving Time. On Eastern Standard Time the schedule drops to one day a week. A head that sprays across a paver walk on every one of those days marks the same strip. Ask about sprinkler aim and call (689) 264-6557.
Furniture and fertilizer
Cambridge Pavers lists rust from patio furniture and fertilizer alongside sprinklers. Metal feet left on damp pavers through a wet June leave rings. Wikipedia puts June at 8.05 inches of rain, the wettest month. Move furniture before that stretch, and ask for a free estimate.
Why do oak leaves and mulch stain Ocoee pavers?
Tannin that returns each fall
Unilock calls tree tannins an organic stain, and Cambridge Pavers says leaf stains return every year, so the choice is to live with them or to remove the tree. A regular cleanup of the leaves also helps. Ask a contractor how often your shaded walk would need attention, and call (689) 264-6557.
Damp beds and green edges
Ocoee gets about 121 rain days a year, per Wikipedia, so mulch and soil beside a paver walk stay wet. Cambridge Pavers groups wood rot, mulch and mold under similar treatments. Shaded edges turn dark first. To have an edge looked at, ask for a free estimate.

Can stains be removed from sealed pavers?
What a sealer changes
Unilock says sealers slow stains from soaking into pavers, which makes spills easier to clean. That is a benefit for a driveway, where tires drip. Sealed or not, an old stain still needs the right treatment. To ask about yours, call (689) 264-6557.
Products that can harm a coat
Cambridge Pavers warns that rust remover can damage sealer, and it does not cover how other cleaners behave on a sealed surface. Strong products on a coat can leave dull or patchy spots. A contractor who knows your sealer picks the treatment with that in mind, so ask for a free estimate.
Why does a contractor test one paver first?
Cambridge Pavers advises testing any cleaner on one or two pavers in a hidden spot before treating a large area, and notes that no method is guaranteed. The test shows whether the color holds and whether the surface reacts. Ask where the test patch will go when you ask for a free estimate.
A test also sets honest expectations. Rust and set-in oil can lighten without vanishing, and the contractor can tell you after the test whether a second round is likely. To learn the plan for your stain before work starts, call (689) 264-6557.
What does paver stain removal cost in Ocoee?
No page found prices stain removal as a service of its own, so the table builds an estimate from published pieces and says so. A standard pressure wash runs about $0.15 to $0.75 per square foot at an Orlando paver company, though that is a general figure and not paver-only. For a number on your stain, ask for a free estimate.
If the stain sits under a failing coat, stripping adds $500 to $1,000 or more, according to Castle Clean & Seal, which also sets a $1,000 minimum. A wash, new sand and sealer runs $1.50 to $3.00 per square foot. Have a quote already? Compare it with this table, or call (689) 264-6557.
| Job built from published pieces | Example area | Published rate | Range |
|---|---|---|---|
| Standard pressure wash only | 600 sq ft driveway | $0.15 to $0.75 per sq ft | $90 to $450 |
| Wash, new sand and sealer | 600 sq ft driveway | $1.50 to $3.00 per sq ft | $900 to $1,800 |
| Wash, new sand and sealer | 900 sq ft driveway and walk | $1.50 to $3.00 per sq ft | $1,350 to $2,700 |
| Strip failed sealer, added to a job | Any size | $500 to $1,000 or more | $500 to $1,000 or more |
| Minimum charge on one company page | Small areas | $1,000 per project | $1,000 |
No page found for Ocoee or Orlando prices paver stain removal as its own service. This table builds the picture from pieces that are published: a standard pressure wash at $0.15 to $0.75 per square foot (a general figure, not paver-only) from an Orlando paver company, the $1.50 to $3.00 range for wash, sand and seal, and the stripping add-on and $1,000 minimum from Castle Clean & Seal. Rust or oil treatment is quoted after a contractor sees the stain.
What is the stain removal process, step by step?
Treatment follows a short, careful order, and the stain decides each choice. To book the first look, call (689) 264-6557.
1. Identify the stain
The contractor reads the color, the shape and the location. A fan from a sprinkler head reads differently than a drip under a car.
2. Test a hidden paver
Following Cambridge, one or two pavers out of sight get the treatment first.
3. Treat that stain type
Oil, rust, tannin and mold each get their own treatment, applied to the stain and not poured over the whole driveway.
4. Rinse with gentle pressure
Unilock says the wrong pressure or nozzle can damage pavers or wash out joint sand, so rinsing stays gentle.
5. Repeat where needed
Rust can take several passes, and the contractor says so before starting.
6. Refill joints, then seal if wanted
Dry pavers get fresh sand, and a coat goes on only if you choose it.
Will pressure washing alone lift the stain?
Often it only moves the surface layer. Unilock says pressure cleans quickly but can damage pavers or wash out joint sand when the pressure or nozzle is wrong, and it warns against wire brushes because metal bits left behind can rust. A treatment matched to the stain does the real work. To ask what the contractor plans to use, ask for a free estimate.
Which stains may never fully come out?
Cambridge Pavers is plain about it: set mortar is very hard to remove, rust may need several applications and heavy tire marks may be easier to fix by swapping pavers. Unilock says a single damaged paver can be lifted out and replaced. A good contractor tells you up front which outcome is likely. To hear it for your stain, call (689) 264-6557.
Want the stain looked at for free?
Send a photo and your street, or phone in. Someone local gets back to you inside 1 business day, and often well before.
Free, no obligation
What do cleaned pavers look like around Ocoee?








Frequently Asked Questions
What do professionals use to seal pavers?
Contractors usually choose between a penetrating matte sealer and a wet look finish. Unilock says the matte type keeps texture and traction, while the wet look darkens color and can add gloss. Water-based sealer cannot go over a solvent-based coat, so mention what is already down when you ask about stains.
What not to use to clean pavers?
Skip wire brushes, which Unilock says leave metal bits that rust, and skip high pressure, which can damage pavers or wash out joint sand. Cambridge also warns against rust remover on sealed pavers, since it can damage the sealer.
Is it a good idea to pressure wash pavers?
Only with care. Unilock says pressure cleans fast but can damage pavers or blast out the joint sand if the pressure or nozzle is wrong. Pressure alone also will not lift every stain, so a treatment may come first.
Should you seal pavers after power washing?
Sealing is optional. Unilock says a sealer slows stains from soaking in and makes spills easier to clean, and that sealing a driveway after cleaning and drying helps hold its color. Joint sand still needs a refill.
What happens if pavers are not sealed?
They keep working, but spills soak in faster. Unilock says sealers slow that soaking, so unsealed pavers near a grill or parked car can hold oil and drips longer. Algae also holds on more easily in damp corners.
How much to clean and seal pavers?
Published rates for a full wash, new sand and sealer start at $1.50 and reach $3.00 per square foot around Orlando. Stain treatment is often priced apart, and no page found sets a rate for stain removal alone.
Why are there orange spots on my Ocoee driveway?
Rust is a common cause. The University of Florida says much Florida well water is high in iron and can leave orange stains on surfaces it touches. Cambridge Pavers lists sprinklers, patio furniture and fertilizer as other sources.
Do oak leaves leave permanent stains on pavers?
Not always permanent, but they come back. Cambridge Pavers says leaf stains recur each year, and Unilock calls tree tannin an organic stain. Sealing slows absorption, and a yearly cleanup keeps them light.
Can every stain come out of pavers?
No. Cambridge Pavers says set mortar is very hard to remove, rust may need several applications and bad tire marks may be easier to fix by replacing the affected pavers. A contractor can say which category yours falls in.
Can a stain visit be booked without sealing?
Yes. Treatment and rinsing stand on their own, and sealing is a separate choice. Ask for both prices on the estimate so you can compare.
Lift the stains from your Ocoee pavers
Tell a contractor what the stain looks like. A written reply lands within 1 business day, often sooner.
Free, no obligation
